УльтразвукThe COBRA manual scanner combined with OmniScan MX2 flaw detector and a 16:64 module is used to perform circumferential weld inspection on small-diameter pipes. The COBRA can hold two PA probes to inspect pipes with OD ranging from 0.84 to 4.5 in.
ОписаниеThe COBRA manual scanner is able to inspect standard pipes as small as 0.84 in. OD to 4.5 in. OD. This scanner uses the OmniScan® MX2 flaw detector with the 16:64 module, and the MXU software to inspect circumferential welds on small-diameter pipes.With its very slim design, this manual scanner inspects pipes in limited access areas where minimal clearance is required. Adjacent obstructions such as piping, supports, and structures can be as close as 12 mm (0.5 in.). This spring-loaded scanner is designed to hold onto carbon steel and stainless steel pipes of different diameters. The COBRA scanner is characterized by its smooth-rolling encoded movement enabling precise data acquisition. The scanner can hold two phased array probes for a complete inspection of the weld in one pass. For pipe-to-component inspections, the scanner can be quickly configured to make one-sided inspections with only one probe. ПОД ВОПРОСОМ КАК БУДЕТ ВСТРАИВАТСЯ ВИДЕО? ЧЕРЕЗ ВИЗУАЛЬНЫЙ РЕДАКТОР ИЛИ ОТДЕЛЬНЫМ ПОЛЕМ И НА КАКИЕ РЕСУРСЫ. Функции:
Specifications:
Размещение товара:Новая технология X-Act Count в сочетании с рентгеновской трубкой напряжением 40кВ и кремниевым...
Новая технология X-Act Count в сочетании с рентгеновской трубкой напряжением 40кВ и кремниевым...
|