+7 (495) 646-87-66
info@avion-ndt.ru

ПРОДУКТЫ:

EPOCH XT

The EPOCH XT is an advanced, portable ultrasonic flaw detector offering many standard measurement features including a tunable square wave pulser, selectable narrow-band and broad-band digital filters, gain range from 0 to 110 dB, peak memory and peak hold, and adjustable PRF.
     

Описание:



Ультразвуковой дефектоскоп EPOCH XT предназначен для неразрушающего контроля материалов в неблагоприятных условиях. Прибор обладает множеством функциональных возможностей для контроля качества и измерения толщины изделий из различных материалов. EPOCH XT оснащен ярким цветным экраном, способен работать от различных источников питания и предоставляет расширенные возможности по управлению данными. Прочный герметичный корпус прибора отвечает требованиям стандарта IP67.

Основные характеристики

  • Соответствует стандарту EN12668-1
  • Успешно пройдены испытания на безопасную эксплуатацию во взрывоопасной атмосфере, устойчивость к вибрациям и ударам.
  • IP67. Отвечает требованиям стандарта IP67. Безопасная эксплуатация в неблагоприятных условиях.
  • Динамические кривые DAC/ВРЧ
    • Динамические кривые DAC
    • Пользовательские сигнальные уровни
    • Соответствует требованиям ASME и JIS
    • Таблица ВРЧ с возможностью редакти­рования настроек
  • Использование литий-ионных, никель-металлгидридных аккумуляторов и щелочных батарей
  • Порт USB-хост для вывода данных на печать и для подключения внешнего запоминающего устройства
  • Порт USB-клиент для передачи данных на ПК
  • Технология Perfect Square™: контроль переднего и заднего фронтов импульса улучшает рабочие характеристики преобразо­вателя и повышает приповерхностное разрешение.
  • Настройка ЧЗИ от 10 Гц до 1 кГц с шагом в 10 Гц.
  • Считывание данных «за один прием».
  • Расширенный буквенно-цифровой регистратор данных
    • Создание файлов, используемых в коррозионных толщиномерах
    • Простые инкрементные файлы
  • Цветной ЖК-экран
  • Легкий: 2,1 кг

Оснащен всеми необходимыми функциями

EPOCH XT включает большинство стандартных функций контроля, среди которых: настраиваемый генератор прямоугольных импульсов, узкополосный и широкополосный цифровые фильтры, диапазон усиления от 0 до 110 дБ, функции запоминания и удержания сигналов с максимальной амплитудой на А-скане, настраиваемая ЧЗИ, отображение результатов измерений с дискретностью до 0,01 мм, два строба с настраиваемыми сигнализациями. Помимо этого прибор имеет ряд дополнитель­ных возможностей: динамические кривые DAC/ВРЧ, встроенные АРД-диаграммы, AWS D1.1 и D1.5, коррекция криволинейной поверхности и интерфейсная программа GageView Pro.

  • Генератор прямоугольных импульсов с технологией PerfectSquare™ позволяет настраивать длительность импульсов для улучшения работы преобразователей
  • Цифровые фильтры приемника: широкополосный, несколько узкополосных, высокочастотный
  • Пять настраиваемых полей измерений. Выберите Строб 1 или Строб 2 для каждого поля
  • Измерение амплитуды с дискретностью до 0,25% от полной высоты экрана
  • Измерение амплитуды от 0 до 110% полной высоты экрана
  • Режимы измерений строба: по максимуму сигнала, по фронту и по первому максимуму сигнала (при измерении толщины изделий).
  • Частота измерений настраивается
  • от 10 Гц до 1 кГц с шагом в 10 Гц
  • Функции запоминания максимума и сравнения с сохраненным максимумом во всех режимах детектирования, вклю­чая радиочастотный режим
  • Режимы отображения координатной сетки
    • Стандартный, от 1 до 10
    • Путь ультразвука
    • Отрезки пути УЗ для контроля наклонным датчиком
    • Вертикальное отображение регулируется: 100% или 110%
  • Индикатор отрезка пути и индикатор режима измерения для каждого строба
  • Индикатор сигнализации для каждого строба

Панель прямого доступа

  • Логически сгруппированные клавиши с цветовым кодом
  • Прямой доступ к настройке ключевых параметров прибора
  • Прямой ввод буквенно-цифровых символов
  • Пять функциональных клавиш для быстрого выбора предустановленных параметров
  • Английская, международная, японская и китайская раскладки

Источники питания

EPOCH XT позволяет использовать три типа батерей, обеспечивающих про­должительную работу прибора.

  • Внутренние перезаряжаемые: никель-металлгидридные (NiMH), литий-ионные аккумуляторы; щелочные батареи
  • Дополнительное внешнее зарядное устройство для аккумуляторов

Создан для работы в сложных условиях

EPOCH XT имеет прочный корпус, соответствующий требованиям стандарта IP67. Прибор способен противостоять дождю в полевых условиях и суровому климату пустыни.

  • Герметизирован согласно IP67.
  • Безопасная эксплуатация во взрывоопасной атмосфере согласно MIL-STD-810F, Процедура 1, NFPA 70E, раздел 500, класс 1, подкл. 2, группа D
  • Устойчивость к ударам IEC 60068-2-27, 60 г, 6 м/сек., 3 оси, 18 общ.
  • Устойчивость к синусоидальным вибрациям IEC 60068-2-6, 50–150 Гц при 0,03 дюймов DA или 2 г, 20 циклов
  • Широкий диапазон рабочих температур:
    • Литий-ионные аккумуляторы: от –10° to 50°C
    • Никель-металлгидридные аккумуляторы: от 0° до 50°C
    • Щелочные батареи: от –10° до 50°C
    • Температура подзарядки: от 0 до 40°C
  • Крепление ремня под правую или левую руку
  • Удобная подставка, которая легко складывается и может быть полностью снята
  • Крепежные кольца для нагрудного ремня
  • Герметичный аккумуляторный отсек, не требующий использования инструмен­тов при замене батареи
  • Герметичный отсек разъемов питания и передачи данных (USB)

Управление данными и документирование результатов контроля

GageView PRO

Интерфейсная программа GageView Pro позволяет управлять данными контроля и структурировать их. Данные могут быть выведены на печать или экспортированы в текстовый файл или таблицу для создания отчетов. Программа GageView Pro также позволяет создавать файлы контроля с идентификаторами (ИД) для последующей загрузки и использования в EPOCH XT. Новые возможности программы включают: вывод изображения на ПК, снимки экрана, резервное копирование, восстановление данных и комбинированный режим вывода информации в нескольких окнах. GageView Pro полностью совместима с дефектоскопами EPOCH 4, 4B, 4PLUS, LT и XT.

  • Экспорт данных толщины или амплитуды в Excel, Word и другие программы
  • Создание, структурирование и управление базами данных контроля
  • Импортирование снимков экрана
  • Вывод изображения на ПК
  • Обмен файлами настроек между прибором и ПК
  • Создание пользовательской библиотеки преобразователей для построения АРД-диаграмм
  • Обновление программного обеспечения EPOCH через двойной USB порт
  • Порт USB-хост для подключения принтера и внешних запоминающих устройств для резервного копирования информации
  • Порт USB-клиент для быстрой передачи данных на компьютер
  • USB-разъемы и разъемы питания находятся под герметичной защитной крышкой.

Аппаратные средства

  • 16-контактный разъем (опция)
    • Выходы сигнализации
    • Вход/выход импульса синхронизации
  • 16-контактный кабель
    • Арт.: EPXT-C-16HW-6 (1,83 м)
    • Арт.: EPXT-C-16HW-20 (6,1 м)

Регистратор данных и документирование результатов контроля

Регистратор данных EPOCH XT от­личается простотой использования и широкими возможностями хранения данных. EPOCH XT использует техно­логии коррозионных толщиномеров Panametrics и подходит как для вы­явления дефектов, так и для измере­ния толщины изделий из различных материалов. 
Типы файлов:

  • Типы файлов EPOCH 4
  • Последовательный
  • 2-D, 2-D EPRI
  • 2-D с пользовательской точкой
  • 3D
  • Бойлер

EPOCH XT также имеет встроенный генератор отчетов. Заголовки отчетов можно редактировать и рас­печатывать на принтере, подключенном через порт USB.

** EPOCH XT герметизирован согласно IP67 и приспособлен для работы в жестких условиях окружающей среды. Необходимо следить за состоянием герметизирующих прокладок в аккумуляторном отсеке и в отсеке разъемов ввода/вывода и своевременно их менять.

Не рекомендуется погружать EPOCH XT в жидкость, поскольку он не предназначен для использования под водой. Гарантия не покрывает повреждения, вызванные погружением прибора под воду.

Технические характеристики*

Общие
Соответствие стандарту EN12668-1
Вес: 2,1 кг с литий-ионным аккумулятором
Габариты: 277 x 150 x 51 мм (в зоне захвата рукой), 71 мм (в зоне дисплея)
Клавиатура: Английская, международная, японская или китайская
Языки: Английский, испанский, французский, немецкий, итальянский, японский, китайский, русский, корейский, норвежский, шведский. 
Другие языки по запросу.
Разъемы для преобразователей: BNC или LEMO 1 (BNC отвечает требованиям стандарта IP67)
Тип батареи: Литий-ионные, никель-металлгидридные аккумуляторы или щелочные батареи
Продолжительность работы батареи: Литий-ионная: 9–10 часов, NiMH: 5 часов, щелочная: 1–2 часа
Питание: от сети переменного тока: 100–120 В, 200–240 В, 50–60 Гц
Защита от воздействий окружающей среды
IP67 Защита от проникновения жидкостей и загрязнений**
Способность работать во взрывоопасной атмосфере MIL-STD-810F, Процедура 1, NFPA 70E, раздел 500, класс 1, подкл. 2, группа D
Устойчивость к ударам IEC 60068-2-27, 60 г, 6 м/сек., 3 оси, 18 общ.
Устойчивость к синусоидальным вибрациям IEC 60068-2-6, 50–150 Гц при 0,03 дюймов DA или 2 г, 20 циклов
Дисплей
Цветной ЖК-экран Частота обновления изображения 60 Гц, настройка цветовой схемы и яркости, комбинированный и полноэкранный режимы.
Размер дисплея: 320 (Ш) x 240 (В) пикселей, 101 x 75 мм
Режим линии развертки: Все точки пересечения нулевой линии в режиме видеосигнала показаны как для полного детектирования УЗ колебаний
Режим амплитудной сетки: 100% или 110% по высоте дисплея
Режим временной сетки: Стандартно от 0 до 10 делений, в режиме оценки пути распространения звука диапазон подразделяется на 5 равных секторов с линиями сетки
Генератор
Настраиваемый генератор прямоугольных импульсов
ЧЗИ: Параметр выбирается пользователем или автоматически (от 10 до 1 000 Гц).
Напряжение генератора: от 50 до 475 В с шагом 25 В
Длительность импульса: Настраиваемая от 40 до 5 000 нс (0,1 МГц) с технологией PerfectSquare™
Демпфирование: 50, 63, 150, 400 Ом
Приемник
Усиление: от 0 до 110 дБ; дискретность определяется пользователем и настраивается посредством клавиш.
Полоса пропускания: от 0,2 до 26,5 МГц при −3 дБ
Цифровые фильтры: 
• 0,2–10,0 МГц • 2,0–21,5 МГц 
• 0,2–1,2 МГц • 5,0–15,0 МГц 
• 0,5–4,0 МГц • 8,0–26,5 МГц 
• 1,5–8,5 МГц
Детектирование: Полная волна, положительная и отрицательная полуволна, радиочастота
Линейность системы: По горизонтали: +/– 0,5% полной высоты экрана
Разрешение: 0,25% полной высоты экрана, погрешность по амплитуде +/– 1 дБ
Отсечка: от 0 до 80% полной высоты экрана с визуальной сигнализацией
Калибровка
Автоматическая калибровка по скорости звука и смещению нуля
Режимы контроля: Импульс-эхо, раздельно-совмещенный, теневой
Единицы измерения: миллиметры, дюймы или микросекунды
Диапазон: от 1,86 до 13,400 мм
Скорость звука: от 635 до 15 240 м/с)
Смещение нуля: от 0 до 4 950 мкс
Задержка: от –59 мм до 12 700 мм
Угол ввода: от 10° до 85° с шагом 0,1°
Измерения
Измеряемые величины: толщина, УЗ-путь, проекция, глубина, амплитуда, время пролета для строба 1 и строба 2
Эхо-эхо: Стандартный
5 полей для отображения рез-тов измерений: пользователь выбирает до пяти измерений по любому строб-импульсу на активном экране.
Стандартная функция DAC/ВРЧ: Построение до 50 точек, ASME, ASME III, JIS, 80-20%, пользовательская DAC и таблица ВРЧ. Динамический диапазон 110 дБ, изменение коэффициента усиления 100 дБ, динамическая настройка усиления, диапазона и задержки, переключение между экранами просмотра DAC и ВРЧ.
Пользовательские кривые DAC с тремя сигнальными кривыми от +10 дБ до –24 дБ.
Таблица ВРЧ для эффективного использования временной регулировки усиления. Возможность настройки ВРЧ из АРД-диаграмм
Измерение амплитуды: от 0 до 110% полной высоты экрана с дискретностью 0,25%. Коррекция криволинейной поверхности: стандартная по внешнему диаметру трубы или прутка для измерений с наклонным преобразователем.
Стробы
Два полностью независимых строба для измерений амплитуды и времени пролета.
Начало строба: Настраивается на всем отображаемом диапазоне
Ширина строба: Настраивается от начала строба до конца отображаемого диапазона
Высота строба: Настраивается от 2 до 95% от высоты экрана
Сигнализации: Положительный и отрицательный пороговые уровни; минимальная глубина (строб 1 и строб 2)
Масштабирование: Отображаемый диапазон в пределах ширины строба 1
Вводы/Выводы
Порт USB-клиент: Обмен данными с GageView Pro
Порт USB-хост: Вывод данных на печать (на любой PCL5-совместимый лазерный или струйный принтер) и подключение USB накопителей.
Разъем LEMO (опция): Выходы сигнализации, вход/выход синхронизатора
Хранение данных
До 10 000 ИД с А-сканами, значениями толщины и параметрами настройки


Стандартная комплектация 
К ультразвуковому дефектоскопу EPOCH XT прилагаются: 
- EP4/MCA: Адаптер переменного тока 
- EPXT-TC: Кейс для транспортировки 
- EPXT-MAN: Руководство по эксплуатации 
- EPXT-HS: Ремень на запястье с возможностью двустороннего размещения 
- EPXT-PS: Регулируемая подставка из нержавеющей стали с резиновым покрытием 
- Литий-ионный или никель-металлгидридный аккумулятор 
- Защитная крышка (крышки) для разъемов преобразователей

Дополнительные комплектующие 
- EPXT-EC: Внешнее зарядное устройство 
- EP4/CH: Нагрудный ремень 
- EPXT-RPC: Резиновый защитный чехол 
- EPXT-DP: Защитная пленка для экрана (10 шт.) 
- EPXT-C-16HW-6: 16-контактный кабель со схемой 
- EPXT-HWIO-B, L: Аппаратные составляющие (вход/выход) 
- EPXT-SEAL-KIT: Кольцевое уплотнение и мембрана

Дополнительные программные опции 
АРД-Диаграммы (Арт.: EPXT-DGS-AVG) 
AWS D1.1/D1.5 (Арт.: EPXT-AWS) 
GAGEVIEW PRO (Арт.: GAGEVIEWPRO-KIT-USB)

*Все характеристики могут быть изменены без предварительного уведомления.

Программные опции

Remote Activation 
EPOCH series advanced software options remotely activated at any time after acquiring the instrument. There is no need to send the instrument back for updates. 

Availability On Instrument 
The availability for each option on the various EPOCH series instruments is defined using the following key:

Available/Optional Available/Optional
Not available Not available
Standard Standard

 API 5UE

Available/Optional
Available/Optional
Available/Optional
Available/Optional
Available/Optional
EPOCH XT
EPOCH 4+
EPOCH 4
EPOCH 4B
EPOCH LT

API 5UE - The API 5UE software option for the EPOCH series is intended to assist with performing inspections in accordance with the American Petroleum Institute's Recommended Practice 5UE. This practice was developed specifically for OCTG manufacturers to inspect and characterize inner-diameter (ID) cracking in newly fabricated pipe. The API 5UE code uses two crack sizing methods to characterize ID cracking: the Amplitude Comparison Technique (ACT) and the Amplitude-Distance Differential Technique (ADDT). The software aids in performing the ADDT method, which is based on the formula:

i =Amax(T 2 -T 1 )k

API 5UE inspections are accomplished using the Peak Memory function on the EPOCH 4 flaw detectors to draw a peak envelope of the crack signal and quickly capture the Amax, T1 and T2 points using a single key press. Using this collected data from the peak envelope, the EPOCH flaw detector performs the necessary calculation using the formula above and displays the crack height in the upper right corner of the screen.

The ADDT inspection method can also be performed using the API 5UE software in a manual mode, allowing the operator to manually select the values for Amax, T1 and T2. All API 5UE data can be easily stored using the EPOCH 4 series datalogger, and the full inspection data can be downloaded to a PC using the EPOCH 4 series interface program, GageView Pro.

  AWS

Available/Optional
Available/Optional
Available/Optional
Available/Optional
Available/Optional
EPOCH XT
EPOCH 4+
EPOCH 4
EPOCH 4B
EPOCH LT

AWS - The AWS D1.1/D1.5 software option for the EPOCH series is intended to assist with performing inspections covered under the American Welding Society D1.1 and D1.5 Structural Welding Code for steel. This code provides inspectors with a method to classify discontinuities found in welds using ultrasonic inspection. This code uses the following formula to develop an indication rating for a reflector found during an inspection:

A - B - C = D

A = Discontinuity Indication Level (dB) 
B = Reference Indication Level (dB) 
C = Attenuation Factor: 2 * (soundpath in inches - 1 inch) (dB) 
D = Indication Rating (dB)

An AWS D1.1 inspector must take the Indication Rating (D) that is calculated based on A, B, and C to an Ultrasonic Acceptance - Rejection Criteria table produced by the AWS in order to classify the severity of the discontinuity that has been located. 


AWS Indication Ratings are displayed in the upper right corner of the A-Scan display, as seen above. Once a proper angle calibration has been performed, the operator selects a reference indication and stores this indication gain level is as the "B" value using the AWS software option. All indications captured after this setup are assigned a "D" value automatically, eliminating the need for manual calculations. All data from AWS D1.1/D1.5 inspections can be saved and recalled at a later time using the EPOCH 4 series datalogger, including setup parameters, indication screen shots, and the values of A, B, C and D for each saved indication.

  ADT

Standard
Available/Optional
Available/Optional
Available/Optional
Available/Optional
EPOCH XT
EPOCH 4+
EPOCH 4
EPOCH 4B
EPOCH LT

ADT - The Advanced DAC/TVG (ADT) software option is intended to significantly enhance the functionality of the standard DAC/TVG options already available on the EPOCH series flaw detectors, allowing users to customize inspections to their unique application requirements. The ADT feature incorporates the high-quality capabilities that adhere to ASME, ASME-3 and JIS sizing codes of standard DAC/TVG options with direct control of gain, range and zero offset, as well as reference and transfer correction. In addition, the ADT option provides new features such as 20%-80% DAC curves, customizable DAC curves, and a user-defined TVG table to meet advanced and unique inspection needs. ADT also allows the user to toggle between DAC and TVG views in many of its functions, allowing the operator the freedom to utilize both techniques during a single inspection.

Advanced DAC Options ADT's enhanced Distance Amplitude Correction functionalities allow more user control over the information acquired and displayed while sizing flaws compared to known reflector amplitude returns. A DAC curve is used to plot amplitude variations of signals from reflectors of the same size, but at different distances from the surface. A single DAC curve is used to plot the peak amplitude of each reflector at different depths within a material to compare with peak amplitude returns from unknown flaws. In the ASME-3 criteria, three DAC curves are plotted: one at peak amplitude, one 6dB below this point (indicating a reflector 50% the size of the reference), and one 14dB below the peak amplitude point (indicating a reflector that is 20% the size of the reference). Advanced DAC takes this functionality many steps further. The operator now has the option to customize up to three DAC curves at user-defined levels between +6dB and -24dB from the primary DAC curve. Additionally, since DAC curve inspections are not valid in most applications when a reflector is below 20% of full screen height, the ADT software allows a new dynamic 20%-80% function, which automatically adjusts the gain of reference signals below 20% up to 80% during setup. This allows a great range for inspections while minimizing the necessary manual gain adjustment. Should gain adjustment be necessary, the Advanced DAC and TVG functions now have a reference correction feature that provides the operator with a digital amplitude measurement of reflectors that is directly compared to the DAC curve level, even with significant gain adjustment during the measurement.

Custom DAC Curves (+6dB, -10dB, -18dB)
20%-80% DAC Feature
ASME-3 DAC Curve
ASME-3 DAC Curve in TVG View

Additionally, any DAC curve or curves set up using the standard or advanced functions are now interchangeable with TVG tables with a single push of a button.


Advanced TVG Options In addition to providing all the options from Advanced DAC in a TVG display for seamless integration of the two sizing techniques, the ADT software now offers a customizable TVG Table option for direct access to TVG point adjustment. This new feature allows fine manual adjustment of any captured TVG points, both for gain and position, as well as manual entry of new TVG points. The TVG Table is also completely compatible with the 1kHz High PRF option on the EPOCH 4 and EPOCH 4PLUS instruments, as well as the Interface Gate option on those instruments, allowing for specialized fast scanning and on-line inspections previously out of reach of the EPOCH 4 series instruments.

TVG Table with Individual Point Adjustment
Resulting TVG Inspection Reference Definition

  Onboard DGS/AVG

Available/Optional
Available/Optional
Available/Optional
Available/Optional
Available/Optional
EPOCH XT
EPOCH 4+
EPOCH 4
EPOCH 4B
EPOCH LT

Onboard DGS/AVG - The Onboard DGS/AVG option is a replacement for the old DGS/AVG option that has been available in the EPOCH 4 and 4 PLUS , which required a PC Interface Program for DGS/AVG setups. This new option allows complete DGS/AVG setups to be performed on the instrument.
The DGS/AVG method allows the operator to size defects based upon a calculated DGS/AVG curve for a given transducer, material, and reflector size, and has been designed to meet the requirements of EN 583-2:2001. This method requires that the operator only has one reference reflector in order to create a DGS curve for flaw sizing. This is much different than the DAC or TVG method which requires that the operator have representative defects at various depths within a part in order to create a curve for flaw sizing. 
To allow the operator to setup DGS/AVG curves on the instrument very quickly, Olympus has developed a transducer library that is stored in the instrument's memory. All of the required data for building DGS/AVG curves is stored in the instrument's memory for each transducer in the library. The onboard DGS/AVG option provides the operator with rapid setup times and easy flaw size evaluation. 

After activating the DGS/AVG software option and selecting the appropriate transducer from the probe library, the operator is walked through a series of instrument setups to display the DGS/AVG curve that correctly corresponds to the operator's particular inspection. These steps include defining a reference reflector, entering adjustment parameters for the critical flaw size of the inspection and entering parameters to compensate for material attenuation of the test piece and calibration block.
Upon proper completion of the instrument setup, the operator simply captures the reference reflector, and the DGS/AVG option displays the correct DGS/AVG curve on screen, along with any warning curves defined in the DGS/AVG setup parameters. When capturing potential defects, the DGS/AVG software displays the defect size evaluation in the upper right corner of the A-Scan display, allowing immediate and easy assessment of flaws. The software also permits adjustment of gain levels, which automatically adjust the displayed DGS/AVG curves, for more accurate inspection of potential defects.

DGS/AVG Curve and Warning Curve Capturing a Defect
Gain Adjustment in DGS/AVG Mode

  Spotweld Assistant

Not available
Available/Optional
Not available
Not available
Not available
EPOCH XT
EPOCH 4+
EPOCH 4
EPOCH 4B
EPOCH LT

Spotweld Assistant (SWA) - The Spotweld Assistant software option is only available with the EPOCH 4 PLUS flaw detector, and is intended to provide automated weld quality analysis using a combination of the industry-proven Spotweld Overlay functionality with an advanced quality analysis algorithm. This software feature greatly enhances the EPOCH series' capability to inspect and characterize spotwelds with improved efficiency and accuracy.

Ultrasonic inspection of spotwelds involves the analysis of what is known as the "ring-down" of sound energy within the weld nugget. Unlike many direct-measurement techniques, spotweld inspection looks at the characteristics of the multiple echoes returned from sound ringing within the weld nugget to determine the quality of the weld. Echo spacing, sound attenuation, and intermediate echo detection are some of the indicators of weld quality analyzed by trained inspectors. Ultrasonic spotweld inspection is completely based on comparison between known "Good" and "Unweld" conditions with unknown welds, and requires a highly trained operator to perform a comprehensive inspection.

"Unweld" Reference Condition

"Good" Weld Reference Condition

The Spotweld Assistant is not intended to remove the necessity of a trained operator; instead, it is meant to enhance the ability of a trained operator to judge welds more efficiently. The operator begins by storing both a "Good" and "Unweld" reference condition into the EPOCH 4 PLUS to calibrate these control situations. The software then uses default comparative algorithms to rate unknown welds based on these stored conditions. If the trained operator disagrees with the software's recommended weld rating, the operator can override this rating manually.

SWA Automated Weld Rating



For more advanced users, the operator is able to manually adjust the comparative algorithmic parameters, such as Attenuation Analysis ,Intermediate Echo Detection and Echo Spacing characteristics to allow a more customized and a higher quality automated weld-quality rating system. 

The Spotweld Assistant option also has advanced features associated with the GageView Pro interface program. Using GageView Pro, the user can set up a full spotweld inspection plan. The operator can pre-define ID values for all welds to be inspected, all required SWA calibrations, and Memos reminding the operator to change transducers when calibrations change. The EPOCH 4PLUS is capable of storing all weld rating information, including calibrations, waveforms, weld rating suggestions, and any operator weld rating overrides for recall and reporting purposes.


GageView Pro Inspection Plan 


Exported SWA Excel File

  Interface Gate

Available/Optional
Available/Optional
Available/Optional
Not available
Not available
EPOCH XT
EPOCH 4+
EPOCH 4
EPOCH 4B
EPOCH LT

Interface Gate - The Interface Gate option is designed to graphically compensate for the change in a water path distance or other delay between the test material and transducer. When the option is activated, a third gate (Interface Gate) is visible on the EPOCH's display. You can position this Interface Gate in the area where you expect to detect the interface echo. The interface echo is a result of the sound energy reflection at the interface between the water path and the front surface of the test material. The Interface Gate maintains the interface echo on the left hand side of the EPOCH screen, regardless of the water path distance, thereby maintaining a precise "acoustic" zero from which the instrument makes digital measurements. The instrument's flaw gates (Gate 1 and 2) automatically track the location of the Interface Gate. The Interface Gate can be used in standard measurement mode or in Echo-to-Echo mode. 





The Interface Gate is mainly used in immersion applications where the water path distance between the front surface of the test material and transducer face is continuously changing. The application may involve an "on-line" type approach with the test material moving steadily past a stationary transducer, or vice versa. If the front surface of the test material is not uniform, that causes slight differences in the water path distance.

  High Pulse Repetition Frequency

Standard
Available/Optional
Available/Optional
Not available
Not available
EPOCH XT
EPOCH 4+
EPOCH 4
EPOCH 4B
EPOCH LT

High Pulse Repetition Frequency (PRF) - In many "on-line" immersion applications, the inspection pieces are passed by the transducer at a fast pace compared to normal, manual scanning. If proper care is not taken, this can result in an effect known as "interleaving". This occurs when a pulse is transmitted into the test material, but the transducer moves prior to the return signal, and it can result in the loss of important data. To compensate for this effect, the High PRF option is used to hold the rate at which a pulse is transmitted into the test material at a high value (1,000 Hz). This is commonly used in conjunction with the Interface Gate option for "on-line" immersion inspection of parts moving quickly by a fixed transducer.

  Low Pulse Repetition Frequency

Standard
Available/Optional
Available/Optional
Available/Optional
Available/Optional
EPOCH XT
EPOCH 4+
EPOCH 4
EPOCH 4B
EPOCH LT

Low Pulse Repetition Frequency (PRF) - The Low Pulse Repetition Frequency option is available on all of the EPOCH series instruments, and is designed to hold the pulse repetition frequency (PRF) of the instrument to a fixed setting of 30 Hz. This option is commonly used in inspections that deal with materials that have very long sound paths, and is intended to avoid a phenomenon known as "wrap-around noise". When inspecting a piece with a long sound path at normal "Auto" PRF, there is a point when the time the sound takes to make a full round-trip from pulse to receive is longer than the time between pulses. If a test setup produces multiple echoes, then the issue is the length of time required for the last multiple echo to arrive at the receiver. Normally, the instrument builds a waveform response by pairing a certain pulse with its return signal and analyzing the characteristics of the return signal. However, in this situation, the received signal does not correspond to its initial pulse (according to the instrument's timing algorithm). The overall affect is the potential for random noise and echoes on the A-Scan display. The Low PRF software feature slows the pulsing of the unit and allows for a certain pulse to be correctly paired with its return signal.

  Floating Gate

Not available
Available/Optional
Available/Optional
Not available
Not available
EPOCH XT
EPOCH 4+
EPOCH 4
EPOCH 4B
EPOCH LT

Floating Gate - The Floating Gate software allows the operator to track and make measurements from A-Scan echoes at either the -6dB or -12dB point. After activation and setup, the gate "floats" at either of these points and tracks changes in the amplitude of a captured signal. This feature is intended to take more consistent, precise readings, especially in Edge Detect mode, by always taking measurements from the same relative amplitude of an echo. The feature also helps to maintain constant measurements in scanning applications where quality of transducer coupling may vary. The Floating Gate software is included with the B-Scan software, and is commonly used in conjunction with Edge Detect mode and B-Scan to maintain the accurate acquisition of measurements from corroded pipe and other materials. Floating Gate can also be used with the Interface Gate to track amplitude changes in the interface echo.

  Curved Surface Correction

Standard
Available/Optional
Available/Optional
Not available
Available/Optional
EPOCH XT
EPOCH 4+
EPOCH 4
EPOCH 4B
EPOCH LT

Curved Surface Correction - The Curved Surface Correction software is intended to adjust digital measurements from a curved inspection surface during angle beam inspection, to compensate for curvature effects on sound path length. The algorithms built into the EPOCH instruments to calculate sound path (V-path) distance, surface (skip) distance, and depth of a reflector when performing angle beam inspection are written for flat surfaces, such as welded plates. The measurement calculations are different in curved surfaces, such as pipes and cylinders, due to the more complex geometry of the part. Therefore, a separate algorithm has been written, the Curved Surface Correction, that requires the operator to input the outer diameter of the test piece and then calculates the correct V-path, skip distance and depth of a reflector. All other calibration settings, including verification of refracted angle and part thickness, must be entered correctly for accurate measurements.

  Spotweld Overlay

Not available
Available/Optional
Available/Optional
Not available
Not available
EPOCH XT
EPOCH 4+
EPOCH 4
EPOCH 4B
EPOCH LT

Spotweld Overlay - The Spotweld Overlay software option provides stored templates for comparison of unknown spotweld conditions to known Good, Stick, Undersized, and other known weld conditions. Upon activation, the operator uses the five soft keys (F1-F5) on the EPOCH to store templates of known weld conditions. These templates can then be recalled to the screen over an unknown weld condition under interrogation (in live A-Scan or Freeze mode) for comparison purposes. Although this option was specifically designed for Spotweld inspection, its template and comparison capabilities can be used in a variety of applications.

  Autofreeze

Not available
Available/Optional
Available/Optional
Not available
Not available
EPOCH XT
EPOCH 4+
EPOCH 4
EPOCH 4B
EPOCH LT

Autofreeze - The Autofreeze software option allows the operator to automatically freeze the live A-Scan when a gate alarm is triggered. This function is typically used in scanning applications or applications with signals that are difficult to obtain and/or maintain because of coupling or orientation issues. The operator activates a gate alarm and sets the gate parameters to capture only echoes of interest, and any echo that breaks the gate and triggers the alarm automatically activates the screen freeze function. This allows the operator to thoroughly inspection signals that may be difficult to catch or maintain in a live screen.

  Backwall Attenuator

Not available
Available/Optional
Not available
Not available
Not available
EPOCH XT
EPOCH 4+
EPOCH 4
EPOCH 4B
EPOCH LT

Backwall Attenuator - The Backwall Echo Attenuator software option is only available in the EPOCH 4 PLUS, and is designed to independently adjust the gain in a screen range region defined by the Gate 2 start point and beyond. The Backwall Echo Attenuator option is commonly used with two specific forms of inspections, both dealing with very small defects. The first is an inspection where potential defects may not be oriented parallel to the direction of sound from the transducer. In this situation, sound will reflect from the defect but not return to the transducer due to the orientation of the reflector. Therefore, such defects are detected by monitoring for backwall signal loss or attenuation. This backwall amplitude change may be missed entirely if the backwall signal is saturated. The Backwall Echo Attenuator option allows the operator to monitor the backwall at a lower gain setting for any signal loss, while still scanning the remainder of the test piece at a high gain level for small defects. The second common inspection for the Backwall Attenuator is in porosity inspection. Because porosity tends to scatter sound instead of return a clear echo, backwall amplitude is sometimes the only way to positively differentiate porosity from material grain structure. The Backwall Echo Attenuator is again used to bring the entire backwall signal on screen to be closely monitored by the operator.

  Wave Analysis

Not available
Available/Optional
Available/Optional
Not available
Not available
EPOCH XT
EPOCH 4+
EPOCH 4
EPOCH 4B
EPOCH LT

Wave Analysis - The Wave Analysis software option allows the operator to make precise point-to-point measurements from any two points along a waveform. This option activates to indexing arrows that trace the length of the visible waveform in the A-Scan view. Typically, the operator will capture a single echo waveform using the instrument gate and use the zoom function to view the waveform close up. The Wave Analysis software then allows the operator to trace the entire waveform with two arrows and take a measurement between these two arrows. A common application for the Wave Analysis software is the measurement of oxide scale on the opposite surface of a pipe or tube. The backwall echo is captured and zoomed using the instrument gate, and the Wave Analysis arrows are used to measure the distance between the peaks representing the inner and outer surfaces of the oxide layer, as seen below. 

  Echo to Echo

Available/Optional
Available/Optional
Available/Optional
Standard
Standard
EPOCH XT
EPOCH 4+
EPOCH 4
EPOCH 4B
EPOCH LT

Echo to Echo - The Echo-to-Echo software option allows the user to make a digital measurement between two echoes captured in Gate 1 and Gate 2 on the instrument. This common measurement technique is used to increase the precision of thickness readings by measuring between multiple echoes of a single thickness inspection, eliminating any couplant layer or surface condition discrepancies. This technique is also used to get a clear measurement from a near-surface echo that is obscured by the ringing of the main bang in its first reflection(s).

  Narrowband Filters

Available/Optional
Available/Optional
Available/Optional
Standard
Not available
EPOCH XT
EPOCH 4+
EPOCH 4
EPOCH 4B
EPOCH LT

Narrowband Filters - Narrowband Filters allow the operator to variably tune out unwanted or unnecessary ultrasonic frequencies being received from the test piece into the EPOCH. This filtering can significantly better the signal-to-noise ratio of the A-Scan, particularly in non-homogenous or scattering materials. The Narrowband Filters have preset ranges to encompass commonly used transducer frequencies, but with the Advance User Filter setting from the EPOCH settings menu, the Filters can be tuned to custom low- and high-pass settings for optimization of the option's capability.

  Square Wave Pulser

Available/Optional
Available/Optional
Available/Optional
Available/Optional
Standard
EPOCH XT
EPOCH 4+
EPOCH 4
EPOCH 4B
EPOCH LT

Square Wave Pulser - The Square Wave Pulser is a powerful tool to improve penetration and response of transducers, particularly with low frequency probes and in highly attenuating materials. Unlike the standard, negative spike pulser of most UT inspection units, the tunable square wave pulser matches the EPOCH's excitation pulse duration to the frequency of a particular transducer, allowing the transducer to ring closer to its natural resonance and increase the amplitude of the signal transmitting into the test material from the transducer. This is especially useful with lower frequency transducers, as the natural resonant period of lower frequency transducers is longer than that of higher frequency tranducers and a traditional spike pulse does not obtain optimal results at these longer resonance frequencies.

2.25Mhz Probe with Square Wave Pulser
2.25MHz Probe with Spike Pulser - 12dB Difference!

  Extended Range

Available/Optional
Available/Optional
Available/Optional
Standard
Standard
EPOCH XT
EPOCH 4+
EPOCH 4
EPOCH 4B
EPOCH LT

Extended Range - The Extended Range option increases the standard measurement range of the EPOCH LT and EPOCH 4B from 0.16 inches - 200 inches (4mm - 5,000mm) to the extended range of 0.038 inches - 400 inches (1mm - 10,000mm).

  Expanded Memory

Available/Optional
Available/Optional
Standard
Standard
Standard
EPOCH XT
EPOCH 4+
EPOCH 4
EPOCH 4B
EPOCH LT

Expanded Memory - The Expanded Memory option increase the memory capacity of the EPOCH LT, EPOCH 4B and EPOCH 4 to allow the storage of more waveforms/calibrations and/or thickness readings. The memory is expanded according to the table below:

Expanded Memory Capacity
Standart Memory Capacity
Thickness Readings
40,000
10,000
Waveforms
2,000
500


GageView™

The GageView and GageView Pro Interface Programs are Windows-based applications that collect, create, manage, and print data from Olympus thickness gages and flaw detectors.

GageView is compatible with gage models 35DL, 35DLHP, and MG2-DL. It provides the following capabilities:

  • Creating Datasets and Surveys
  • Editing stored data such as thickness data
  • Viewing Dataset and Survey file information including thickness readings, waveform, gage setup values, and transducer setup values
  • Downloading and uploading thickness surveys to and from the Panametrics ultrasonic thickness gages
  • Exporting Surveys to spreadsheets and other programs
  • Collecting snapshot screens (graphical data sent by a thickness gage that duplicates the exact screen display)
  • Printing reports such as Thickness, Setup Table, Statistics, Color Grid, and others
  • Upgrading gage operating software

GageView Pro is compatible with flaw detector models Epoch 4, Epoch 4B, Epoch LT, Epoch 4 PLUS, and Epoch XT, as well as the gage models listed above. When used with flaw detectors, GageView Pro provides the following capabilities:

  • Exporting thickness or amplitude data saved on the Epoch to Excel, Word, or similar programs
  • Create, format, and manage test databases
  • Export real-time screen snapshots, including B-scans, to a PC or printer
  • Import and export setups between the Epoch and a PC
  • Set up inspection plan templates, including pre-loaded probe calibrations, IDs, and memos
  • Create a custom DGS probe library
  • Upgrade Epoch operating software

Опция B-скан дефектоскопа EPOCH XT характеризуется увеличенной емкостью A-скан и быстрой скоростью сканирования во время контроля дефектов и коррозионного мониторинга. В-скан, наряду с курсорами толщины, отображает значения толщины в определенных участках сканирования, автоматически сохраняет А-сканы с минимальной толщиной или при срабатывании сигнализации.

Основные характеристики

Оператор выполняет контроль трубы с использованием EPOCH XT и каретки

  • Разрешающая способность при сканировании: до 0,51 мм
  • Высокая частота сканирования: до 508 мм/сек при минимальном разрешении
  • До 150 000 показаний толщины на B-скан
  • Автоматическая звуковая сигнализация о превышении необходимой скорости сканирования
  • Плавающий строб-импульс, повышающий точность и стабильность показаний толщины
  • Возможность пролистывания и просмотра сохраненных данных В-скан
  • Работа во всех режимах контроля, включая ВРЧ и плавающий строб

Плавающий строб

B-скан включает в себя опцию плавающего строба, которая позволяет оператору устанавливать Строб 1 и/или Строб 2 на выбранный уровень в зависимости от амплитуды сигнала, в диапазоне от –1 дБ до –14 дБ. Данная функция позволяет получать более точные результаты, особенно в режиме измерения по фронту сигнала.

Информация для заказа

В дополнение к программной опции B-скан необходимы каретка положения, кабель для преобразователя и кабель для подключения кодировщика (см. Таблицу ниже). Данная программная опция может быть удаленно активирована на приобретенном ранее приборе EPOCH XT при наличии порта ввода/вывода.

МодельНомер для заказаОписание
EPXT-BSCANU8140025Программная опция BSCAN для EPOCH XT
EPXT-ENC-CBL-10U8840087Кабель для подключения кодировщика B-скан EPXT; 3 м
EPXT-ENC-CBL-25U8840088Кабель для подключения кодировщика B-скан EPXT; 7,6 м
EPXT-ENC-CBL-50U8840089Кабель для подключения кодировщика B-скан EPXT; 15,2 м
EPXT-ENC-CBL-100U8840090Кабель для подключения кодировщика B-скан EPXT; 30,4 м
EPXT-BSCAN-KIT-10U8140021Комплект BSCAN для EPXT (программная опция B-скан, каретка, кабель кодировщика 3 м)
EPXT-BSCAN-KIT-25U8140022Комплект BSCAN для EPXT (программная опция B-скан, каретка, кабель кодировщика 7,6 м)
EPXT-BSCAN-KIT-50U8140023Комплект BSCAN для EPXT (программная опция B-скан, каретка, кабель кодировщика 15,2 м)
EPXT-BSCAN-KIT-100U8140024Комплект BSCAN для EPXT (программная опция B-скан, каретка, кабель кодировщика 30,4 м)


ПРЕОБРАЗОВАТЕЛИ

Angle Beam Transducers & Wedges

Angle beam transducers are single element transducers used with a wedge to introduce a refracted shear wave or longitudinal wave into a test piece.

AWS Transducers & Wedges

AWS transducers and wedges conform to the specific requirements of the American Welding Society's Structural Welding Code for angle beam assemblies used in weld inspection.

CDS Wedges

CDS wedges are designed to generate both a 30 degree shear wave and a 70 degree longitudinal wave in steel for sizing ID connected cracking by means of the 30-70-70 technique.

Contact Transducers

A contact transducer is a single element longitudinal wave transducer intended for use in direct contact with a test piece.

Dual Element Transducers

A dual element transducer consists of two crystal elements housed in the same case, separated by an acoustic barrier.

Integral Angle Beam Transducers

Integral angle beam transducers provide superior signal-to-noise characteristics and contain durable plastic wear. Both Right Microdot and Straight Microdot connectors are available on some styles.

Normal Incidence Shear Wave Transducers

These single element contact transducers introduce shear waves directly into the test piece without the use of refraction.

Replaceable Delay Line Transducers

A replaceable delay line transducer is a single element Videoscan transducer with a case design configured for use with a replaceable delay line.

Spot Weld Transducers

Spot weld transducers are specifically designed to provide optimal performance for nondestructive testing of numerous types of spotwelds, including those used in automotive and industrial applications.

Standard Angle Beam Transducers

Standard Angle Beam Transducers have a large element size that allows for inspection of thicker components and provides a large scanning index. They are used with a wedge to introduce a refracted shear wave or longitudinal wave into a test piece.

Protected Face Transducers

A protected face transducer is a single element longitudinal wave contact transducer that can be used with a delay line, protective membrane or protective wear cap.

Immersion Transducers

An immersion transducer is a single element longitudinal wave transducer with a quarter wavelength layer acoustically matched to water.

TOFD Transducers & Wedges

TOFD transducers and wedges generate refracted longitudinal waves in steel for use in applications involving crack sizing by means of the Time of Flight Diffraction technique.

High Frequency Transducers

High frequency transducers are single element contact or immersion transducers designed to produce frequencies of 20 MHz and greater.

Atlas, European Standard Transducers

Atlas European Standard Transducers feature LEMO connectors, metric unit element diameters, and common frequencies, such as 1, 2, and 4 MHz. They are designed to meet inspection criteria referenced throughout Europe and the rest of the world.

EMAT Transducers

EMAT's are single element transducers that employ a magnetostrictive effect to transmit and receive ultrasonic waves.

RTD Transducers

RTD Transducers are well known in the nuclear industry for inspection of critical weld areas in pipes and pressure vessels.

Immersion Special

Immersion special transducers refer to a variety of transducers that conduct many specific applications such as measuring wall thickness, inspection of aluminum plating, or multi-element array flaw detection.

Test Blocks

Calibration and/or Reference Blocks should be used in every application. Standard blocks are available for angle beam calibrations and thickness calibrations of common materials.

Immersion Accessories

Immersion transducer accessories aid in immersion applications and techniques. Accessories include bubblers, immersion tanks, reflective mirrors and search tubes.

Special Application Transducers

Special Applications Transducers include combination longitudinal/shear mode transducers, polymer (PVDF) immersion transducers, captive water column transducers and much more.

Transducer Cables

Transducer cables are available in a wide variety of types, lengths, and connector styles including BNC, Lemo, UHF, and Microdot.

Couplant & Adaptors

The use of couplant is almost always necessary to provide acoustic coupling between the transducer and the test piece. We offer various types of couplants to suit virtually all applications.

Передовые решения неразрушающего контроля

Контроль сварных соединений Коррозионный мониторинг Технология направленных волн Aerospace Inspection Solutions Stress Corrosion Cracking Solutions Контроль композитных материалов Промышленные сканеры Экспресс-диагностика трубопроводов

Дефектоскопы

Портативные ультразвуковые дефектоскопы Вихретоковые дефектоскопы Оборудование с фазированными решётками BondTesting Матричные вихретоковые дефектоскопы Технология направленных волн Генераторы-приёмники Датчики и преобразователи

Интегрированные системные решения в области НК

Контрольно-измерительные системы
Системы диагностики прутков Системы диагностики трубопроводов

Толщиномеры

Преобразователи и комплектующие

Компоненты микроскопов

Modular Microscope Assemblies Optical Microscope Frames Optical Microscope Modules

Оптические измерительные системы

Лазерные конфокальные микроскопы Опто-цифровые микроскопы

Видеоскопы, бороскопы

Видеоскопы Промышленные фиброскопы Стандартные жёсткие бороскопы Программное обеспечение для генерации отчетов Источники света Системы прокрутки

Высокоскоростные видеокамеры

Анализаторы XRF и XRD

Настольные XRD/XRF анализаторы
Переносной XRF-анализатор Портативный XRF-анализатор DELTA Портативный дифрактометр (XRD) Промышленный XRF-анализатор Тестовый стенд XRF

Микроскопия

Semiconductor & Flat Panel Display Inspection Инвертированные металлургические микроскопы Лазерные конфокальные микроскопы Модульные микроскопы Объективы Опто-цифровые микроскопы Поляризационные микроскопы Программное обеспечение для анализа изображений Прямые металлургические микроскопы Стерео микроскопы Цифровые камеры

Применение НК

Техподдержка